How To Change Lexus UX Engine Oil

Regularly changing the engine oil in your Lexus UX is vital for maintaining the overall health and performance of your vehicle. Engine oil acts as a lubricant, reducing friction and heat between moving parts. Over time, the oil can degrade and become less effective, leading to potential engine damage and decreased performance. Regular oil changes help to keep your Lexus UX running smoothly and extend its lifespan.

• It is generally recommended to change the engine oil every 5,000 to 7,500 miles, but refer to your owner's manual for specific intervals based on your vehicle model and driving conditions.

Gathering the Required Tools and Supplies

Before you begin changing the engine oil in your Lexus UX, gather the necessary tools and supplies:

• The appropriate engine oil for your Lexus UX, typically synthetic 0W-20, but consult your owner's manual for the correct specifications.
• An oil filter compatible with your Lexus UX.
• An oil filter wrench.
• An oil drain pan.
• A socket set.
• A jack and jack stands or ramps to elevate the vehicle securely.
• Clean rags or paper towels for cleanup.

Preparing Your Vehicle

Follow these steps to ensure your vehicle is ready for an oil change:

• Park your Lexus UX on a level surface and engage the parking brake.
• Shift the car into park or gear (for manual transmissions).
• Carefully raise the vehicle using a jack and support it with jack stands or ramps.
• Locate the oil drain plug and oil filter. If necessary, consult your owner's manual for their exact locations.

Draining the Old Oil

Now it's time to drain the old oil from your Lexus UX:

• Place the oil drain pan underneath the oil drain plug.
• Using the appropriate socket, loosen and remove the oil drain plug.
• Allow the old oil to drain completely into the pan.
• Remember to wear gloves to protect your hands from the used oil.

Replacing the Oil Filter

While the old oil is draining, you can proceed with replacing the oil filter:

• Use the oil filter wrench to remove the old oil filter.
• Ensure that the old filter's gasket comes off with the filter.
• Apply a small amount of new oil to the gasket of the new oil filter.
• Screw the new oil filter into place by hand and tighten it with the oil filter wrench.

Adding the New Oil

After the old oil is drained and the new filter is installed, it's time to add fresh oil to your Lexus UX:

• Replace and tighten the oil drain plug using the socket.
• Locate the oil filler cap on the top of the engine and remove it.
• Insert a clean funnel into the oil filler hole.
• Pour the appropriate amount of new engine oil into the engine, following the recommendations in your owner's manual.
• Replace the oil filler cap securely.

Checking the Oil Level and Cleanup

To ensure that the oil level is correct and clean up any spills, follow these final steps:

• Start the engine and let it run for a few minutes.
• Turn off the engine and wait for a couple of minutes to allow the oil to settle.
• Remove the dipstick, wipe it clean, and reinsert it fully.
• Pull out the dipstick again and check the oil level. It should be within the recommended range.
• Dispose of the used oil and filter responsibly by taking them to a recycling center or an authorized collection point.

By following these steps, you can successfully change the engine oil in your Lexus UX. Regular oil changes will contribute to the optimal performance and longevity of your vehicle, ensuring a smooth driving experience.