How To Change Lexus IS Engine Oil

If you're a Lexus IS owner, you already know the importance of regular maintenance to keep your vehicle running smoothly. One of the most critical aspects of car maintenance is changing the engine oil. Regular oil changes can extend the life of your car's engine, improve its performance, and keep it running smoothly. In this guide, we'll show you how to change your Lexus IS engine oil step by step.

Gather Your Tools and Supplies

Before starting, gather all the tools and supplies you'll need. You'll need a wrench, an oil filter wrench, an oil drain pan, a funnel, a new oil filter, and new engine oil. Make sure to purchase the correct type of oil recommended by Lexus for your specific model. You can find this information in your owner's manual or by checking the manufacturer's website.

Prepare Your Vehicle

Start by parking your Lexus on a level surface and turning off the engine. It's best to let the engine cool down for a few hours before attempting to change the oil. This will ensure that the oil has settled at the bottom of the engine and is easier to drain.

Locate the Oil Drain Plug

Locate the oil drain plug under your Lexus's engine. The oil drain plug is usually located at the bottom of the oil pan. You may need to use a wrench to loosen the bolt. Place the oil drain pan under the oil drain plug to catch the old oil.

Drain the Old Oil

Carefully loosen the oil drain plug until oil starts to flow out. Let the oil drain completely into the oil drain pan. Once the oil has stopped flowing, clean the area around the oil drain plug and replace the drain plug. Tighten it to the manufacturer's recommended torque specification.

Replace the Oil Filter

Locate the oil filter under the engine. Use the oil filter wrench to loosen the filter and remove it from the engine. Take care not to spill oil everywhere. Use a clean rag to wipe the area clean where the filter was attached to the engine. Apply a thin film of new oil to the rubber gasket on the new filter before installing it. Use the oil filter wrench to tighten the new filter to the manufacturer's recommended torque specification.

Add New Engine Oil

Remove the oil filler cap located on top of the engine. Insert the funnel into the oil filler hole and pour in the new oil. Refer to your owner's manual for the recommended oil level and type. Once you've added the correct amount of oil, replace the oil filler cap.

Check Your Work

Start your engine and let it run for a few minutes. Check for any leaks around the oil drain plug and oil filter. Turn off the engine and wait a few minutes for the oil to settle. Use the dipstick to check the oil level. Add more oil if necessary to reach the correct level.

Dispose of the Old Oil

It's important to dispose of the old oil responsibly. Pour the old oil into a sealable container and take it to your nearest auto parts store, mechanic, or recycling center. Do not pour it down the drain or into the trash.

Changing your Lexus IS engine oil may seem daunting, but it's a simple task that can save you time and money in the long run. Regular oil changes can improve your car's performance and help it last longer. By following our step-by-step guide, you'll be able to change your oil like a pro in no time. Remember to always refer to your owner's manual for specific instructions and recommended maintenance schedules.